Effects of microplastics on sedimentary geochemical properties and microbial ecosystems combined with hydraulic disturbance.

Microplastics (MPs) pollution is widely investigated owing to its potential threats to river ecosystems. However, it remains unclear whether hydraulic disturbance deepens or mitigates the effects of MPs-contaminated sediments on the river environment. Herein, we studied the impact of sediment aggregates, organic matter, and enzyme activity, with emphasis on microbial community structure and function in sediments exposed to MPs (1 %, 5 %, and 10 % w/w) in conjunction with hydraulic disturbance. The experimental results showed that the influence of MPs on the sediment under hydraulic disturbance is more significant than that of static culture, especially for various environmental factors (MWD, MBC, and sucrase activity etc.). The proportions of the >0.05 mm-fraction aggregates increased from 74-76 % to 82-88 % in the sediment throughout the entire disturbance process. It has been found that the disturbance generally promotes the interaction between MPs and sediments. FAPROTAX analysis demonstrated that the disturbance reduced the difference in effects on microbial functional genes between the control group and the MPs-added groups by up to 10 times, suggesting that the effects of disturbance on MPs-contaminated sediments are relatively complex. This work provides new insights into the effects of hydraulic disturbance on physicochemical properties and microbial communities of MPs-contaminated sediment.

Efficient Cr(VI) removal by pyrite/porous biochar: Critical role of potassium salt and sulphur.

The excessive accumulation of hexavalent chromium (Cr(VI)) in the environment poses a risk to environment and human health. In the present study, a potassium bicarbonate-modified pyrite/porous biochar composite (PKBC) was prepared in a one-step process and applied for the efficient removal of Cr(VI) in wastewater. The results showed that PKBC can significantly remove Cr(VI) within 4 h over a wide range of pH (2-11). Meanwhile, the PKBC demonstrated remarkable resistance towards interference from complex ions. The addition of potassium bicarbonate increased the pore structure of the material and promoted the release of Fe2+. The reduction of Cr(VI) in aqueous solution was primarily attributed to the Fe(II)/Fe(III) redox cycle. The sulphur species achieved Fe(II)/Fe(III) cycle through electron transfer with iron, thus ensuring the continuous reduction capacity of PKBC. Besides, the removal rate was also maintained at more than 85% in the actual water samples treatment process. This work provides a new way to remove hexavalent chromium from wastewater and demonstrates the potential critical role of potassium bicarbonate and sulphur.

Predictive value of Dmax and %ΔSUVmax of 18F-FDG PET/CT for the prognosis of patients with diffuse large B-cell lymphoma.

PURPOSE: To investigate the prognosis value of a combined model based on 18F-fluoro-deoxyglucose positron emission tomography-computed tomography (18F-FDG PET-CT) baseline and interim parameters in patients with diffuse large B-cell lymphoma (DLBCL). METHODS: We retrospectively analyzed the PET metabolic parameters and clinical data of 154 DLBCL patients between December 2015 and October 2020. All of these patients underwent 18F-FDG PET/CT scan before treatment and after three or four courses of chemotherapy. The optimal cut-off values for quantitative variables were determined by the receiver operating characteristic (ROC) curve. The baseline and interim PET/CT parameters, which respectively included maximum standardized uptake value (SUVmax0), total metabolic tumor volume (TMTV0), standardized total metabolic tumor volume (STMTV0), and the distance between the two furthest lesions (Dmax) and total tumor lesion glycolysis (TTLG1), SUVmax1, TMTV1, and the rate of change of SUVmax (%ΔSUVmax), and clinical characteristics were analyzed by chi-squared test, Kaplan-Meier survival curve, and Cox regression analysis. RESULTS: Of 154 patients, 35 exhibited disease progression or recurrence. ROC analysis revealed that baseline 18F-FDG PET/CT metabolic parameters, including maximum standardized uptake value (SUVmax0), total metabolic tumor volume (TMTV0), standardized total metabolic tumor volume (STMTV0), and the distance between the two furthest lesions (Dmax), along with interim 18F-FDG PET/CT metabolic parameters such as total tumor lesion glycolysis (TTLG1), SUVmax1, TMTV1, and the rate of change of SUVmax (%ΔSUVmax), were predictive of relapse or progression in DLBCL patients (P < 0.05). The chi-squared test showed that TMTV0, STMTV0, Dmax, SUVmax1, TMTV1, TTLG1, %ΔSUVmax, Deauville score, IPI, Ann Arbor stage, and LDH were associated with patient prognosis (P < 0.05). Multivariate Cox regression analysis showed that Dmax (P = 0.021) and %ΔSUVmax (P = 0.030) were independent predictors of prognosis in DLBCL patients. There were statistically significant differences in PFS among the three groups with high, intermediate, and low risk according to the combination model (P < 0.001). The combination model presented higher predictive efficacy than single indicators. CONCLUSION: The combined model of baseline parameter Dmax and intermediate parameter %ΔSUVmax of 18F-FDG PET/CT improved the predictive efficacy of PFS and contributed to the risk stratification of patients, providing a reference for clinical individualization and precision treatment.

Polydopamine-modified MOF-5-derived carbon as persulfate activator for aniline aerofloat degradation.

Residual flotation chemicals in beneficiation wastewater seriously threaten local ecosystems, such as groundwater or soil, and must be treated effectively. Currently, the degradation of organic pollutants using nitrided MOFs-derived carbon to activate persulfate (PDS) has attracted considerable attention. Hence, we developed a new synthetic strategy to load dopamine hydrochloride (PDA) onto MOF-5-derived porous carbon (PC) to form NPC, and the degradation of a typical flotation Aniline aerofloat (AAF) at high salinity by a low dose of the NPC/PDS system was investigated. Several characterization analyses such as TEM, XRD, Raman, FT-IR and XPS demonstrated that the nitrogen-rich indolequinone unit in PDA provided nitrogen to PC during the pyrolysis process. This enabled the core-shell structure of NPC and the synergy among the multiple components to induce the AAF degradation by PDS over a wide pH scale in a short period of time. It was deduced that the degradation of AAF by the NPC-8/PDS system was a non-radical pathway dominated by 1O2, which relied mainly on the conversion of superoxide radicals (O2•-) and surface-bound radicals. Among them, the pyridine N in the sp2 hybrid carbon was considered as a possible active site. This non-radical pathway was resistant to pH changes and background substances in the water, and well overcame the inhibition of the reaction by natural organic substances and inorganic anions in natural water. In this study, A novel approach to the synthesis of homogeneous MOFs nuclear-derived porous carbon was proposed and the application of MOFs-derived porous carbon for AAF remediation of mineral processing wastewater was broadened.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification.

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

An exploratory study of unexplained concentration of 18F-PSMA-1007 in the bladder for prostate cancer PET/CT imaging.

18F-PSMA-1007 PET/CT imaging is increasingly used for the diagnosis, staging, and efficacy assessment of patients with prostate cancer. Compared with other PSMA tracers, 18F-PSMA-1007 is mainly cleared by the liver and bile and has lower urinary clearance, thus allowing a better assessment of the lesions around the bladder. However, there were some patients who showed an obvious concentration of the 18F-PSMA-1007 in the bladder, which may affect the observation of peripheral lesions, but the mechanism of this change is unknown. The aim of this study was to explore the cause of bladder 18F-PSMA-1007 concentration by assessing the clinical and imaging characteristics of 18F-PSMA-1007 PET/CT scans. A total of 284 patients were included in this retrospective study, and their clinical characteristics such as age, height, weight, Gleason score, metastases, different treatment methods, the level of liver and kidney function, PSA level, and imaging characteristics such as 18F-PSMA-1007 injected activity, the interval between injection to scan, physiological distribution (parotid gland, kidney, liver, spleen, intestine, obturator internus), pathological distribution (prostate lesions, metastases) were collected, and were compared after subgrouping using bladder urine SUVmax. This study showed that the distribution of bladder 18F-PSMA-1007 was not correlated with the above clinical and imaging characteristics, so further studies are needed to find the explanations, and thus to improve the disease assessment of this type of prostate cancer patients.

Developing self-floating N-defective graphitic carbon nitride photocatalyst for efficient photodegradation of Microcystin-LR under visible light.

The frequent occurrence of algal blooms in water bodies leads to a significant accumulation of microcystin-LR (MC-LR). In this study, we developed a porous foam-like self-floating N-deficient g-C3N4 (SFGN) photocatalyst for efficient photocatalytic degradation of MC-LR. Both the characterization results and DFT calculations indicate that the surface defects and floating state of SFGN synergistically enhance light harvesting and photogenerated carrier migration rate. The photocatalytic process achieved a nearly 100 % removal rate of MC-LR within 90 min, while the self-floating state of SFGN maintained good mechanical strength. ESR and radical capture experiments revealed that the primary active species responsible for the photocatalytic process was OH. This finding confirmed that the fragmentation of MC-LR occurs as a result of OH attacking the MC-LR ring. LC-MS analysis indicated that majority of the MC-LR molecules were mineralized into small molecules, allowing us to infer possible degradation pathways. Furthermore, after four consecutive cycles, SFGN exhibited remarkable reusability and stability, highlighting the potential of floating photocatalysis as a promising technique for MC-LR degradation.

Coalescence of As(II) with •OH: The pivot for co-processing of As(III) and butyl xanthate.

Although water metalloid pollution is widely studied, the effect of the combined pollution of organic matter and metalloids in mining water and, especially, the possible interaction mechanisms between metalloids and flotation reagents, are both poorly understood. Existence of mixed pollution of metalloids and organic compounds tends to cause more serious harm to natural organisms. In this study, a synergistic removal of arsenite (As(III)) and butyl xanthate (Bx) in an advanced oxidation system was reported using biochar-based catalyst loaded with nano-zero-valent iron from an inexpensive iron source (iron slag) to activate peroxodisulfate. The removal efficiencies were improved by 30 % in the co-existence of As(III) and Bx compared to those of the single pollutant. The theoretical calculations, especially frontier molecular orbital theory, revealed the generation of [AsO2-OH]•- by the combination of As(II) with •OH. This [AsO2-OH]•- participated in the oxidative degradation of Bx with high activity and combined with the sulfur falling off Bx after the reaction to form a novel Fe-As-S complex as indicated by X-ray absorption +fine structure analysis. Overall, this study reports the generation of low-valent arsenic active substances of [AsO2-OH]•- and their effect on the removal of organic pollution containing S atoms in advanced oxidation systems under typical mining water conditions with the coexistence of As(III) and expands the understanding and application of traditional free radicals.

Carbonyl and defect of metal-free char trigger electron transfer and O2- in persulfate activation for Aniline aerofloat degradation.

Residual flotation reagents in mineral processing wastewater can trigger severe ecological threats to the local groundwater if they are discharged without treatment. Metal-free biochar-induced persulfate-advanced oxidation processes (KCBC/PS) were used in this study to elucidate the degradation of aniline aerofloat (AAF) - a typical flotation reagent. In KCBC/PS system, AAF can be removed at low doses of catalyst (KCBC, 0.05 g/L) and oxidant (PS, 0.3 mM) additions with high efficiency. The analysis revealed the dominance of O2•- among the identified reactive oxygen species (ROS), which achieved deeper mineralization for the AAF degradation in the KCBC/PS system. The role of the electron transfer mechanism was equally important; the importance was corroborated by the chemical quenching experiments, electron spin resonance (ESR) detection, probe experiments, and electrochemical analysis. It benefited from the electron transfer mechanism in the KCBC/PS system and exhibited a wide pH adaptation (3.5-11) and high resistance to inorganic anions for real mining wastewater treatment. Combined with theoretical calculations and other analyses, the carbonyl group was deemed to be the active site of the non-radical pathway of biochar, while the site of the conversion of SO4•- to superoxide radicals by biochar activation represented a defect. These findings revealed a synergistic effect of multiple active sites on PS activation in biochar-based materials. Moreover, the intermediate degradation products of AAF from mass spectrometry indicated a possible pathway through the density functional theory (DFT) method, which was effective in reducing the environmental toxicity of pollutants for the first time according to the T.E.S.T software and seed germination experiments. Overall, our study proposed a novel modification strategy for cost-effective and environmentally friendly biochar-based catalysts, while also deepening our understanding of the mechanism of activation of persulfate by metal-free carbon-based materials.

Performance of 18 F-FAPI PET/CT in assessing glioblastoma before radiotherapy: a pilot study.

BACKGROUND: We aimed to determine the performance of 18 F-FAPI PET/CT used for preprocedural assessment of glioblastoma before radiotherapy. METHODS: Twelve glioblastoma patients having undergone incomplete surgical resection or biopsy were examined with 18 F-FAPI PET/CT and MRI scanning before radiotherapy. All patients had confirmed tumor residues according to findings of histopathological and/or long-term clinical and radiological follow-ups. Lesion characterization data, including SUVmax and tumor-to-background ratio (TBR) on PET/CT were attained. PET/CT and MRI findings were compared in terms of number of lesions. The correlation between immunohistochemistry, molecular expression, and PET/CT parameters was also evaluated. RESULTS: 18 F-FAPI PET/CT detected 16 FAPI-avid out of 23 lesions in 12 patients described on MRI. MRI was statistically different from 18 F-FAPI PET/CT for lesion detection according to the exact McNemar statistical test (P = 0.0156). The SUVmax and TBR of the glioblastomas was 7.08 ± 3.55 and 19.95 ± 13.22, respectively. The sensitivity and positive predictive value (PPV) of 18 F-FAPI PET were 69.6% and 100%, respectively. Neither the Ki-67 index nor the molecular expression was correlated with the FAPI-PET/CT parameters. CONCLUSION: 18 F-FAPI PET/CT detects glioblastomas at a lower rate than MRI. However, the 100% PPV of the examination may make it useful for differentiating controversial lesions detected on MRI. The 18 F-FAPI-avid lesions are displayed more clearly probably due to a higher TBR. 18 F-FAPI PET/CT imaging might find application in glioblastoma biopsy and radiotherapy planning.

Effect of dissolved humic acids and coated humic acids on tetracycline adsorption by K2CO3-activated magnetic biochar.

Humic acids (HAs) widely exist in water environment, and has an important impact on the adsorption of pollutants. Herein, HAs (both dissolved and coated) was employed to assess the effect on the removal of the organic contaminant tetracycline (TC) by K2CO3 modified magnetic biochar (KMBC). Results showed that low concentration of dissolved HAs promoted TC removal, likely due to a bridging effect, while higher concentration of dissolved HAs inhibited TC adsorption because of the competition of adsorption sites on KMBC. By characterization analysis, coated HAs changed the surface and pore characteristics of KMBC, which suppressed the TC removal. In a sequential adsorption experiment involving dissolved HAs and TC, the addition of HAs at the end of the experiment led to the formation of HAs-TC ligands with free TC, which improved the adsorption capacity of TC. TC adsorption by KMBC in the presence of dissolved HAs and coated HAs showed a downward trend with increasing pH from 5.0 to 10.0. The TC adsorption process was favorable and endothermic, and could be better simulated by pseudo-second-order kinetics and Freundlich isotherm model. Hydrogen bonds and π-π interactions were hypothesized to be the underlying influencing mechanisms.

Catalytic removal of attached tetrabromobisphenol A from microplastic surface by biochar activating oxidation and its impact on potential of disinfection by-products formation.

There are numerous studies concerning the impacts of widespread microplastic pollution on the ecological environment, and it shows synergistic effect of microplastics and co-exposed pollutants in risk enhancement. However, the control methods for removing harmful pollutants from microplastic surface to reduce their ecological toxicity has rarely been explored. In this paper, magnetic graphitized biochar as a catalyst is shown to achieve 97% removal of tetrabromobisphenol A (TBBPA) from microplastics by biochar mediated electron transfer. The changes in the surface and structure of microplastics caused by various aging processes affected the pollutant attachment and subsequent removal efficiency. After chlorination, the highest disinfection by-product (DBP) generation potential was observed by the group of microplastics attached with TBBPA. The oxidation system of biochar activating peroxodisulfate (PDS) can not only reduce the kinds of DBPs, but also greatly reduce the total amount of detected DBPs by 76%, as well as reducing the overall toxicity. This paper highlights an overlooked contribution of pollutant attachment to the potential risks of DBP generated from natural microplastics during chlorination process, and provides the underlying insights to guide the design of a biochar-based catalyst from wastes to achieve the removal of TBBPA from microplastics and reduce the risks and hazards of co-contamination.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review.

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

In Situ Coupling Carbon Defective C3N5 Nanosheet with Ag2CO3 for Effective Degradation of Methylene Blue and Tetracycline Hydrochloride.

The development of novel catalysts for degrading organic contaminants in water is a current hot topic in photocatalysis research for environmental protection. In this study, C3N5 nanosheet/Ag2CO3 nanocomposites (CNAC-X) were used as efficient photocatalysts for the visible-light-driven degradation of methylene blue (MB), and tetracycline hydrochloride (TC-HCl) was synthesized for the first time using a simple thermal oxidative exfoliation and in situ deposition method. Due to the synergistic effect of nanosheet structures, carbon defects, and Z-scheme heterojunctions, CNAC-10 exhibited the highest photocatalytic activity, with photodegradation efficiencies of 96.5% and 97.6% for MB (60 mg/L) and TC-HCl (50 mg/L) within 90 and 100 min, respectively. The radical trapping experiments showed that ·O2- and h+ played major roles in the photocatalytic effect of the CNAC-10 system. Furthermore, intermediates in the photodegradation of MB and TC-HCl were investigated to determine possible mineralization pathways. The results indicated that C3N5 nanosheet/Ag2CO3 photocatalysts prepared in this work could provide an effective reference for the treatment of organic wastewater.

Phytoremediation plants (ramie) and steel smelting wastes for calcium silicate coated-nZVI/biochar production: Environmental risk assessment and efficient As(V) removal mechanisms.

Arsenic is one of the most common and harmful pollutants in environment throughout the world, especially in aqueous solutions. In this study, two kinds of industrial solid wastes (Oxide scale (OS) and Blast furnace slag (BFS)) and one kind of phytoremediation plant waste (Ramie stalk) were used to prepare an environmentally friendly, low-cost, and efficient calcium silicate coated nano zero-valent iron (nZVI)/biochar composite (BOS) for As(V) adsorption. The potential environmental risks of BOS and their effects on removal of arsenic ions from aqueous media were investigated. The adsorption mechanism was explored and discussed based on XRD, SEM-EDS, XPS, etc. The results suggested that the environmental risk and heavy metals toxicity in BOS by co-pyrolysis were significantly reduced compared to the original materials, and no additional contaminant was observed in the subsequent experiments. Simultaneously, the BOS showed excellent As(V) removal capacity (>99%) and regenerative properties. The As(V) removal mechanisms are mainly ascribed to the complexation and co-precipitation between Fe and As, and the hydrogen bond between CO functional group of BOS and As. The mechanism of enhanced nZVI activity for As(V) removal was revealed. A protective layer of Ca2SiO4 was formed on the surface of nZVI during the co-pyrolysis process to prevent the passivation of nZVI. During the reaction process, the Ca2SiO4 covering the nZVI surface would be continuously detached to expose the fresh surface of nZVI, thus providing more redox activity and adsorption sites. This study provides a new way to treat and recycle industrial steel solid wastes and phytoremediation plant wastes, and the produced calcium silicate coated-nZVI/biochar composite is proposed to be a very promising material for practical remediation of As(V)-contaminated water bodies.

Insight into disinfection byproduct formation potential of aged biochar and its effects during chlorination.

Biochar can achieve multiple benefits including solid waste management, polluted water remediation, carbon sequestration, and emission reduction. However, various environmental factors (such as temperature variations and dry-wet alternation) and microbial activity may lead to the fragmentation, dissolution, and oxidation of biochar. These accelerate the dissolution of biochar-derived dissolved organic matter (DOM) and then influence disinfection byproducts formation potential (DBPFP) throughout the water treatment process. In this paper, biochars from six biomass feedstocks with five aging processes were prepared, and the DBPFP of biochar and its derived DOM were first studied systematically. Different aging processes might increase the DBPFP of biochar by increasing DOM content and changing the fraction distribution of DOM derived from biochar. Especially, the DBPFP of biochar increased apparently with the chemical aging process. Coexisting with the environmental concentration of humic acid, even aged biochar showed the potential to reduce DBPFP and integrated toxic risk value of the mixed system. In this study, the DBPFP of biochar-derived DOM during the disinfection process is confirmed, and the results can give information to the selection of biomass feedstocks of biochar and its service life in the water treatment process.

Alfalfa biochar supported Mg-Fe layered double hydroxide as filter media to remove trace metal(loid)s from stormwater.

Polluted stormwater (PSW) treatment is becoming increasingly important because of the existence of multiple pollutants from non-point pollution sources. Alfalfa biochar loaded with Mg/Fe layered double hydroxide (AF-LDH) was successfully synthesized to remove trace metal(loid)s from stormwater. The adsorption kinetics and isotherms of metal(loid)s in a mono-component system and the reusability of the composite materials was investigated in this study. The result showed that the maximum removal efficiency for Pb(II), Cu(II), Zn(II), Cd(II), As(V), and Cr(VI) were 98.98 %, 98.11 %, 97.88 %, 97.71 %, 98.81 %, and 50.89 %, respectively, when added calcined AF-LDH (AF-LDO) composite material to the multi-component solution. The AF-LDH and AF-LDO could efficiently remove trace pollutants (10-100 µg/L) from multi-component solution, especially for AF-LDO, which could completely remove the tested six trace metal(loid)s. Furthermore, Fourier transform infrared spectra and X-ray diffraction characterizations supported the Mg/Fe layered double hydroxide reconstruction. The main mechanisms of Pb(II), Cu(II), Zn(II), and Cd(II) (cationic metals) removal were ion exchange and surface precipitation, whereas As(V) and Cr(VI) (anionic metals) were mainly dislodged through the formation of surface complexation, electrostatic attraction, and interlayer anion exchange, concerning the -OH and -COOH of AF-LDH. Importantly, the results of the column experiment demonstrated that AF-LDO was superior to AF-LDH for anionic metal removal from stormwater. In this study, we synthesized AF-LDH and AF-LDO for trace metal(loid) removal and proposed a new and practical approach for stormwater purification.

The effects of biochar on antibiotic resistance genes (ARGs) removal during different environmental governance processes: A review.

Antibiotic resistance genes (ARGs) pollution has been considered as one of the most significant emerging environmental and health challenges in the 21st century, many efforts have been paid to control the proliferation and dissemination of ARGs in the environment. Among them, the biochar performs a positive effect in reducing the abundance of ARGs during different environmental governance processes and has shown great application prospects in controlling the ARGs. Although there are increasing studies on employing biochar to control ARGs, there is still a lack of review paper on this hotspot. In this review, firstly, the applications of biochar to control ARGs in different environmental governance processes were summarized. Secondly, the processes and mechanisms of ARGs removal promoted by biochar were proposed and discussed. Then, the effects of biochar properties on ARGs removal were highlighted. Finally, the future prospects and challenges of using biochar to control ARGs were proposed. It is hoped that this review could provide some new guidance for the further research of this field.

Effects of biochar-based materials on the bioavailability of soil organic pollutants and their biological impacts.

Motivated by the unique structure and superior properties, biochar-based materials, including pristine biochar and composites of biochar with other functional materials, are considered as new generation materials for diverse multi-functional applications, which may be intentionally or unintentionally released to soil. The influencing mechanism of biochar-based material on soil organisms is a key aspect for quantifying and predicting its benefits and trade-offs. This work focuses on the effects of biochar-based materials on soil organisms within the past ten years. 206 sources are reviewed and available knowledge on biochar-based materials' impacts on soil organisms is summarized from a diverse perspective, including the pollutant bioavailability changes in soil, and potential effects of biochar-based materials on soil organisms. Herein, effects of biochar-based materials on the bioavailability of soil organic pollutants are detailed, from the perspective of plant, microorganism, and soil fauna. Potential biological effects of pristine biochar (PBC), metal/metal compounds-biochar composites (MBC), clay minerals-biochar composites (CMBC), and carbonaceous materials-biochar composites (CBC) on soil organisms are highlighted for the first time. And possible mechanisms are presented based on the different characters of biochar-based materials as well as various environmental interactions. Finally, the bottleneck and challenges of risk assessment of biochar-based materials as well as future prospects are proposed. This work not only promotes the development of risk assessment system of biochar-based materials, but broadens the strategy for the design and optimization of environmental-friendly biochar materials.

Construction of Bi2WO6/CoAl-LDHs S-scheme heterojunction with efficient photo-Fenton-like catalytic performance: Experimental and theoretical studies.

The photo-Fenton-like catalytic process has shown great application potential in environmental remediation. Herein, a novel photo-Fenton-like catalyst of Bi2WO6 nanosheets decorated hortensia-like CoAl-layered double hydroxides (Bi2WO6/CoAl-LDHs) was synthesized via hydrothermal process. The optimized Bi2WO6/CoAl-LDHs composite performed the high-efficiency photo-Fenton-like catalytic performance for oxytetracycline (OTC) removal (98.47%) in the mediation of visible-light and H2O2. The comparative experiment, technical characterization and density functional theory calculation results indicated that the efficient photo-Fenton-like catalytic performance of Bi2WO6/CoAl-LDHs was attributed to the synergistic action of the Fenton-like process of cobalt ions in CoAl-LDHs, an internal electric field and the S-scheme heterojunction form between Bi2WO6 and CoAl-LDHs, which could significantly promote the active substance formation and the photocatalytic process in the catalytic system. This study will stimulate the new inspiration of designing the efficient catalytic system for environmental remediation and other fields.